We use full architectural grade powder from Akzo Nobel and Prismatic Powders; both global leading quality powder suppliers. The powder coating which we apply is to a minimum film thickness of 60 microns. We also offer a zinc-rich primer which provides excellent anti-corrosion properties on mild steel products and can then be top-coated in any required colour giving a quality and professional finish. We can also offer all marine-grade finishes up to C5M.
We specialise in re-coating any product that has already been powder coated. This could be either to change the colour or improve the appearance and durability of the produce.
M&S Powder Coating and Shot-Blasting Limited use quality, industry approved equipment, including a pre-treatment plant for aluminium and galvanised steel; and a box oven which measures 8 metres by 2.5 metres by 2.5 metres in dimension.
We are able to offer a shot blasting service to our customers to prepare products for powder coating. This gives the produce the perfect key for powder coating and removes surface contaminants, such as unwanted paint, rust and mill-scale. All our blasting is carried out in our blast booth using blast and crushed glass. We recycle our blast-media as much as possible. The list below is a small one, and is by no means exhaustive. It is to give you an idea of items that can be blasted. Basically, anything that is metal can be blasted. We are able to blast items up to a maximum of 10 metre long, 4 metre high and 5 metre wide.
Powder Coating &